CRC Anti-Seize Engine Assembly Lubricant 10 Oz

Fortified with molybdenum and graphite

The CRC Anti-Seize Engine Assembly Lubricant
provides protection from scoring, galling and seizing on all types
of engines during the installation and assembly of parts as well as
the critical 5 to 10 second period of initial engine start-up and
break-in.

This specially formulated lithium based compound fortified with
molybdenum, graphite and an advanced additive package, adheres
tightly to metal surfaces to prevent destructive metal to metal
contact on sliding or rotational contact surfaces.

It remains active over long storage periods preventing rust and
corrosion and supporting cushioning of close fitting parts.
Continued use prevents damage caused by extreme conditions,
increasing performance and prolonging equipment life.

CRC Anti-Seize Engine Assembly Lubricant
Features:

• Contains a High Percentage of Moly and Graphite
• High Timken OK Load Rating – Contains extreme pressure
  additives (EP)
• Water Resistant – Resists washout to prolong
  performance
• Prevents Corrosion – Contains anti-rust and anti-wear additives
  to improve equipment life
• Will not clog up oil passages
• Quickly dissolves into lubrication oil during engine
  operation
• Non-Conductive, Non-Corrosive – With proper use, won’t mar or
  pit equipment surfaces
• Reduces Torque and Eliminates Heat Freezing – Minimizes wear on
  metal-to-metal contact points
• Never Becomes Brittle – Stays soft to ensure protection of
  parts

CRC Anti-Seize Engine Assembly Lubricant
Specifications:

• Flash Point: > 200 degreesC
• Appearance: Black semi-solid grease
• NLGI Grade: 0 to 1/2
• Worked Penetration Test: 330-360
• Timken OK Load: 50lb
• Temperature Range: -20 degreesC to +180 degreesC

Application:

• Recommended for use in the assembly of engines, transmissions,
  differentials and all mechanical parts
• Use on camshaft bearings and lobes, crankshafts, engine
  bearings, gears, lifters, push rods, valve stems and all areas of
  rotational or sliding metal-to-metal contact