CRC Bright Zinc Galvanic Rust Protection 1L

Protect metal from rust

The CRC Bright Zinc Galvanic Rust Protection‘s
unique formulation combines superior rust inhibiting properties of
zinc with a tough but flexible resin coating for heavy-duty
protection and a bright finish of new galvanising. Pure zinc
particles are embedded in a resin system which forms a quick-drying
highly-protective coating on bare steel or iron, with more than 50%
highest purity zinc in the dried film. This organo-zinc coating
provides an effective barrier for protection of treated surfaces
from environmental conditions like moisture, humidity, water and
heat while the zinc particles – due to sacrificial anodisation of
zinc – stop rust and rust creepage if the coating is scratched,
abraded or dented.

CRC Bright Zinc provides a gloss top-coat finish but unlike
standard paint systems, resists undercutting and blistering from
corrosion. It’s ideal for touch-up and repair of damaged galvanised
surfaces and effective long-term rust protection with the bright
look of a newly galvanised surface. For ultimate protection, prime
the metal surface with CRC Zinc It then apply CRC Bright Zinc as a
top coat.

CRC Bright Zinc provides excellent cover and is capable to be
applied as a heavy film for extra protection without forming runs,
delivered from a unique aerosol system giving a smooth even coat.
Ongoing protection can be achieved through simple re-coating within
5 years, depending on conditions. Protection in extreme conditions
may require re-application more frequently.

Uses:

• Structural steel or frames – Welded seams, spot welding
  repairs, rivet holes, signs and signposts, pipes, roofs
• Electrical – Transformers, transmission towers, earth
  pegs
• Farm equipment – Water tanks, tank stands, fences, gates,
  animal raceways in milking sheds and yards, farm implements and
  tractor draw bars, metal junction, terminal boxes, pump equipment,
  corrugated metal buildings
• Boats and boat trailers – Shackles, winches, draw bars,
  subframes, wheel and guards
• Car or caravan – Inner door panels, tow bars, exhaust tail
  pipes and wheel protection under hub caps
• Perfect touch-up – For galvanised products which have been cut,
  drilled or welded
• At home – On iron railings, roofing and spouting, gutters,
  plumbing, ducting, radio and TV aerials, outdoor fixtures, hinges,
  fences and gates, wrought iron, air conditioning and refrigeration
  units
• Industrial – Equipment and machinery, machine housings
• Roading and Construction – Bridges, guard rails, lamp
  stands
• For use on steel or iron – Not effective when used on
  non-ferrous metals
• Wherever iron or steel needs protection and a bright galvanised
  finish is required

CRC Bright Zinc Galvanic Rust Protection
Features:

• Zinc-rich – More than 50% highest purity zinc in the dried
  film, embedded in a protective enamel coating
• Protective Coating – Resistant to salt corrosion, water and
  heat. Powerful protection in harsh conditions
• Bright galvanised finish – Ideal for repairing damaged
  galvanised surfaces to restore rust protection
• Excellent adhesive qualities – Forms a tough coat for long-term
  protection
• Easy application – High film build in one step
• Heat Resistance – Up to 120 degreesC
• Long-term corrosion protection – Corrosion Protection Factor 60
  (up to 5 years outdoors before recoating is necessary, depending on
  conditions)
• Sacrificial anodisation of Zinc – Stops rust and rust creepage
  even when scratched, abraded or dented
• Fast drying – Touch dry in 20 minutes, recoat immediately, full
  cure in 24 hours
• Easy re-application over existing film and/or clean surfaces –
  For ongoing protection
• Single coat – No overcoating required. For additional
  protection, prime the metal surface with CRC Zinc It prior to
  applying CRC Bright Zinc
• Ready to Use Aerosol – No additional mixing or chemical
  additives required. Easy application. No clean up
• Does not contain CFCs, methylene chloride
• MPI Approved C23

CRC Bright Zinc Galvanic Rust Protection
Specifications:

Physical Properties

• Propellant (Aerosol): Hydrocarbon
• Flash Point: -81°C (Propellant)
• Temperature Range: Up to 120°C
• Corrosion Protection Factor: 60
• Reapplication Period Indoors: As required
• Reapplication Period Outdoors: Up to 5 years, depending on
  conditions
• Colour: Dries to the colour of new galvanising

Performance Characteristics

• Touch Dry: 15-20 minutes
• Full Cure: 24 hours
• Time To Overcoat: 1 hour
• Theoretical Coverage: Up to 10m²/1L, Up to 2m²/aerosol
  can
• Clean Up With: Mineral turpentine or white spirits