CRC Copper Anti-Seize And Lubricating Compound 500ml

Prevent seizing and galling

The CRC Copper Anti-Seize and Lubricating Compound
is a general purpose anti-seize lubricant that prevents seizing and
galling caused by high temperatures, heavy loads, vibration and
corrosion. This unique formula has a smooth texture, fine particle
sizing and familiar copper colour, making it an excellent choice
for closely fitted parts that need extreme lubrication. Regular use
of Copper Anti-Seize will increase performance and prolong
equipment life.

Uses:

• Lubricates, prevents seizing and galling of surfaces
• Highly suitable for closely fitting parts
• Recommended for use on bolts, bushings, fittings, flanges,
  gaskets, headers, manifolds, nuts, packings, pipes, plugs, screws,
  studs, threaded surfaces and wire rope

CRC Copper Anti-Seize and Lubricating Compound
Features:

• Copper-Based: safe for use on both ferrous and non-ferrous
  metals
• High Temperature Resistance: protects parts up to 982 degrees
  C
• Electrically Conductive: does not insulate and interrupt
  current flow
• Good Choice for Use on Soft Metal Applications: does not
  compromise integrity of soft metals
• Will Not Harden: heat aging won’t affect lubricity of
  product
• Facilitates Fast and Easy Disassembly: saves time in taking
  apart components
• Minimal VOC Content: contains negligible amounts of volatile
  organic compounds which cause ground smog
• Contains No Known Ozone Depleting Chemicals: offers effective
  performance while complying with the EPA regulations on the use of
  ozone depleting chemicals
• Meets MIL-PRF-907E military specification
• MPI Approval C12 (All animal products except dairy)

CRC Copper Anti-Seize and Lubricating Compound
Specifications:

• Flash Point: 221 degrees C (COC)
• Appearance: Copper to bronze semi-solid paste
• Odour: Petroleum
• Vapour Density: Not applicable
• Base Type: Copper
• Flammability: Non-flammable
• Specific Gravity: 1.09
• Plastic Safe: Yes
• Operating Temperature Range: -70 degrees C to +982 degrees
  C
• Type of Film: Paste
• Torque Coefficient (k) on Steel Nuts and Bolts: 0.10
• Clean up: Remove with general purpose degreaser