CRC Fast Action Dry Lube With PTFE Spray 500ml

The quick drying formula with PTFE

The CRC Fast Action Dry Lube with PTFE Spray is a
high-performance dry film lubricant that is applied wet and quickly
dries to a non-staining micro-thin film of submicron PTFE
particles. It’s formulated for extreme heavy loads, sliding
mechanisms and open gears in applications where the use of wet
lubricants is not desirable. It penetrates and bonds to metal and
most other surfaces and can be used on equipment in operation for
uninterrupted workflow.

CRC Drylube with PTFE prevents sticking reducing friction, heat and
wear with a very low coefficient of friction over a wide
temperature range. It prevents galling or seizing and will not
melt, freeze, run, pool or contaminate in-process materials.

Uses

• Machine bed lubrication
• Saw benches
• Extreme heavy loads
• Sliding mechanisms
• Open gears/bearings
• Packaging machinery
• Excellent mould release and parting agent
• Paper, textile and plastics manufacturing industries where
  direct contact is involved with surfaces which would be
  contaminated by wet or silicone based products

CRC Fast Action Dry Lube with PTFE Spray
Features:

• Extreme pressure lube – Premium performance lubricant for heavy
  loads, metal-on-metal sliding on flat surfaces, open gear
  systems
• Dries fast – Does not interrupt workflow. Designed for
  applications in clean industries where the use of wet lubricants is
  not desirable
• Resists dust and dirt – For lubrication in dusty environments
  where contaminants might interfere with conventional wet
  lubricants
• Does not wash or drip off – Excellent adhesion to metal, wood,
  rubber, plastic, glass and most other surfaces
• Excellent chemical resistance – Effective in difficult
  conditions
• Temperature Range – Effective from -20 degreesC to +250
  degreesC
• MPI Approved C11

CRC Fast Action Dry Lube with PTFE Spray Specifications:

Physical Properties

• Flash Point: -5 degreesC
• Boiling Point: 8 degreesC (initial)
• Odour: Isopropyl Alcohol
• Appearance: Opaque White Film
• Solubility: Miscible with water
• % Volatile: 96%
• Vapour Density: 96%
• Specific Gravity (bulk): 0.88
• Propellant Hydrocarbon: Hydrocarbon

Performance Characteristics

• Type of film: Dry white PTFE film
• Temperature Range: -20 degrees C to +250 degrees C