CRC Food Grade Chain Lubricant Aerosol 340g

Semi-Synthetic Food Grade Chain Lubricant With Foaming
Action

CRC Food Grade Chain Lube is a special blend of mineral oil and
synthetic additives, designed to keep roller drive and conveyor
chains lubricated. Foaming action provides outstanding penetration
and creeps deep between wire strands, chain links, pins, rollers
and sprockets. As the foam subsides it leaves a lubricating
non-drying film that remains in place and resists wash-off and
sling-off. Specifically designed to provide the convenience of
aerosol application where incidental food contact may occur.
Regular use will help inhibit corrosion, reduce load stress and
greatly extend chain life.

Temperature Range from -20 degreesC to +150 degreesC
(continuous), +170 degreesC (intermittent). MPI Approved C15. NZ
AsureQuality assessment for food/beverage including dairy factories
with incidental contact. NSF H1 Registered for incidental food
contact.

Features and Benefits

• Foaming action – For outstanding penetration and coverage. No
  messy overspray.
• Penetrates, lubricates, protects – Low viscosity formula creeps
  deep between wire strands, chain links, pins, rollers and
  sprockets
• Reduces friction and wear – Reduces load stress
• Corrosion protection – Lengthens chain and sprocket life
• For effective lubrication of all types of chain and conveyor
  systems – Particularly where incidental food contact may occur
• Silicone free – Will not harm paint, plastic or wood surfaces.
  Easier clean-up and removal of excess oil. Allows treated surfaces
  to be repainted.
• 360 degree valve – Aerosol can be sprayed from any position
  even upside down
• Non-toxic, odourless, tasteless
• Temperature Range – Effective from -20 degreesC to +150
  degreesC (continuous), +170 degreesC (intermittent)
• MPI Approved C15
• NZ AsureQuality assessment for food/beverage including dairy
  factories with incidental contact
• NSF H1 Registered for incidental food contact

Uses

• Recommended for use as a lubricant and corrosion inhibitor on
  conveyor chains, packaging equipment, hoist chains, link and roller
  assemblies, forklift trucks and many other industrial
  applications

Specifications:

Approvals

• NSF H1 Registered for incidental food contact

Physical Properties

Flash Point	>+300 degrees C (COC)
Solubility	Not in Water
Odour	Mild
% Volatile	0
Appearance	Light amber clear liquid
Specific Gravity	0.874
Propellant	Hydrocarbon

Performance Characteristics

Type of Film	Non-drying
Dry Time	Non-drying
Temperature Range	-20 degrees C to +150 degrees C (continuous), +170 degrees C (intermittent)