CRC Food Grade Dry Lubricant Aerosol 400ml

Advanced Dry Film PTFE Lubricant

CRC Food Grade Dry Lube is a technically advanced
multi-purpose dry film lubricant that is applied wet, and cures to
a dry, non-staining micro thin film of submicron PTFE particles. It
penetrates and bonds to metal, wood, rubber, plastic, glass and
most other surfaces and provides long lasting lubrication where
conventional wet film lubricants are difficult to apply or retain.
 CRC Food Grade Dry Lube is ideal for lubrication in
dusty environments where contaminants or airborne food particles
might interfere with conventional wet lubricants.

CRC Food Grade Dry Lube prevents sticking, reducing
friction, heat and wear with a very low coefficient of friction
over a wide temperature range. Will not melt, freeze, run, pool or
contaminate in-process materials.

CRC Food Grade Dry Lube is ideal for sliding mechanisms
and on extreme heavy loads to reduce wear and prevent galling or
seizing. For mechanisms that are operated at infrequent intervals
or are lubricated for life.

Wide temperature range from -20 degreesC to +250 degreesC. MPI
Approved C15. NZ AsureQuality assessment for food/beverage
including dairy factories with incidental contact.

Features and Benefits

• Cures to a thin dry film of PTFE particles – For excellent
  long-lasting lubrication
• Resists dust and product debris build-up – Ideal for food
  processing and packaging machinery
• Excellent adhesion to most surfaces – Metal, wood, rubber,
  plastic, glass and most other surfaces
• Excellent anti-static properties
• Does not contain oils or silicone
• 360 degree valve – Aerosol can be sprayed from any position
  even upside down
• Non-toxic, low odour, tasteless
• Wide temperature range – Effective from -20 degreesC to +250
  degreesC
• MPI Approved C15
• NZ AsureQuality assessment for food/beverage including dairy
  factories with incidental contact

Uses

• Lubricates food processing and handling equipment used with
  high temperatures – Ovens, stoves, racks, chutes, guides, rails,
  conveyors, bottling machinery, fridges, freezers
• Excellent mould release and parting agent – Horticultural and
  other food handling and sorting lines, product will not stick to
  equipment. Mixers, moulders, pie warmers, candy floss and popcorn
  machines
• Recommended for food packaging machinery – Does not attract
  airborne paper/cardboard particles or product debris
• Also recommended for metal-to-nonmetal and plastic-to-plastic
  lubrication applications

Specifications:

Physical Properties

Flash Point	-5 degrees C
Boiling Point	8 degrees C (initial)
Oduor	Isopropyl Alcohol
Solubility	Miscible with water
Appearance	Opaque White Film
% Volatile	96%
Vapuor Density	96%
Specific Gravity (bulk)	0.88

Performance Characteristics

Type of Film	Dry white PTFE film
Effective Temperature Range	-20 degrees C to +250 degrees C