CRC Food Grade Extreme Duty Grease Cartridge 397g

High performance lubricating grease

CRC Food Grade Extreme Duty Grease is a NLGI 2, tan, high performance lubricating grease that provides effective lubrication and protection of ball, roller, and plain bearings and sliding surfaces. It excels in applications where resistance to water, broad operating temperatures, and high loads are absolutely necessary.

CRC Food Grade Extreme Duty Grease formulation provides unsurpassed resistance to oxidation and corrosion including salt spray. It is resistant to moisture, water and detergent wash down. CRC Food Grade Extreme Duty Grease has exceptional mechanical stability even in the presence of water. It is non toxic and contains no heavy metals or other environmentally undesirable additives.

Temperature range -29?C to +205?C. MPI C15. NZ AsureQuality for food/beverage including dairy factories with incidental contact. NSF H1 Registered for incidental food contact.

Features and Benefits

• Wide temperature range from-29?C to +205?C
• Timken OK Load 29.5kgs
• Exceptional mechanical stability even in the presence of water.
• Moisture, water and detergent wash-down resistant
• Unsurpassed resistance to extreme pressures, oxidation and corrosion, including salt spray.
• MPI C15 approved for incidental food contact
• NZ AsureQuality assessment for food/beverage including dairy factories with incidental contact
• NSF H1 Registered for incidental food contact

Uses

• FOR USE BY – Dairy plants, Breweries, Canneries, Meat Processing Plants, Food Processing and Handling, Equipment, Fish Processing Plants, Carton/Packaging Equipment, Pharmaceutical Manufacturers etc
• FOR USE ON – Ball, roller and plain bearings, and sliding surfaces, gears, valves, pumps, conveyors, fittings, linkages, hoists, o-rings etc.

Application Method: Cartridge
Approvals

• NSF H1 Registered for incidental food contact

Performance Characteristics

Temperature Range	-29 degreesC to +205 degrees C
ASTM D-1743 (Bearing Corrosion)	Pass
ASTM D-2509 (Timken OK Load)	29.5kgs
ASTM D-2266 (4 Ball Wear)	0.45
ASTM D-2596 (Four Ball EP, Weld Point)	620
ASTM D-1264 (Water Washout. % Loss)	2.75
ASTM D-1478 (Low Temp Torque, -40 degreesC, g-cm)

Physical Properties

Flash Point	175 degreesC COC
Thickener Type	Calcium Sulphonate
NLGI	2
Appearance	Tan with smooth texture
Drop Point	300 degreesC
Viscosity Index	90
Viscosity @ 40 degreesC	100cST
Viscosity @ 100 degreesC	10.8 cST
VOC	0%
Pour Point	– 12 degreesC

Specifications:

CRC/Barcode	Pack Sizes Available
35615 072213356151	Cartridge 397 g, pack size 10 23.50cm H x 5.60cm W x 5.60cm D : 0.40kg