Synthetic non-drip lubricant
The CRC High-Performance Multilube Gel is a unique
synthetic penetrating gel specifically formulated to provide a
clean, odourless lubricant for high-pressure and high-temperature
applications. It contains friction modifiers, anti-wear additives
and tacking agents, does not drip off or fling off at high speed
and resists hot and cold wash-off for long-lasting protection. It’s
ideally suited for highly loaded reciprocal moving parts and for
general use in heavy industries, workshops, automotive and around
the home workshop.
Applied as a clear oil with excellent capillary action CRC
Multilube Gel penetrates quickly into tight areas before solvents
evaporate leaving a waterproof load bearing gel that stays in place
and withstands high pressure and shock load conditions. The speedy
shift in viscosity provides both, excellent penetration action and
premium staying power.
Uses
- Industrial and Workshops – Forklift truck chains, hoists,
conveyors (also overhead conveyors), coupling mechanisms, overhead
door drive systems - Automotive – Door stops on cars, valve stems, sliding rails for
venting roofs, sliding doors, car seats, suspension bushings, door
lock/window mechanisms, hood shocks, throttle cables, cruise
control cables, mechanical linkages - General – Hinge mechanisms, tractors and farm equipment, car
wash equipment, marine use, special steel screws
CRC High-Performance Multilube Gel Features:
- Penetrating gel – Applied as an oil, it penetrates on
application, evaporates very quickly within 5 to 10 seconds and
sets as a gel-like grease - Odourless and clear – For clean application and
handling - Does not attract dust
- Fresh and salt water proof – Resists hot and cold wash
off - High pressure and heat resistant – Remains active under high
pressure loads, resists impacts of vibrations and shock load
conditions - Adhesive qualities – High resistance to fling-off at high
speeds and temperatures, does not drip off overhead
applications - Reduces noise and vibration
- Resistant against non-concentrated acids and alkalis
- Does not contain chlorinated solvents
- Free from silicones, resins and acids – Will not damage rubber,
o-rings, painted surfaces - Wide temperature range – From -35 degreesC to +300
degreesC - MPI Approved C15
- NZ AsureQuality assessment for food/beverage/dairy factory
incidental contact - Includes Permastraw Dual-Action Spray System – One piece
actuator with two-way spray that ensures that straw stays in
place - 500ml
CRC High-Performance Multilube Gel
Specifications:
Physical Properties
- Flash Point: < 0 degrees C
- Odour: Low odour
- Appearance: Clear gel-like grease
- Solubility: Insoluble in water
- Propellant: Hydrocarbon
Performance Characteristics
- Type of film: High-tack viscous oil
- Set-up time: 5-10 seconds
- Temperature Range: -35 degreesC to +300 degreesC
Reviews
There are no reviews yet.