CRC Maniseal Exhaust Cement Black Tube 145g

Seals in all noxious fumes

CRC Maniseal Exhaust Cement is a sodium silicate
based sealer for mufflers and tailpipes that resists high
temperatures. It expands and sets when heated, ensuring a perfect
seal against carbon monoxide and other noxious fumes.

Brown Exhaust Cement
CRC Maniseal BROWN Exhaust Cement is a sealing and gasketing
compound designed exclusively for use in assembly of Automotive
Exhaust Systems.

Black Exhaust Cement
CRC Maniseal BLACK Exhaust Cement is a sealing and gasketing
compound designed to seal joints in fire boxes and flues or for
repairing kilns. It can be used for an exhaust system when black is
the desired colour.

CRC Maniseal Exhaust Cement Features:

• Bridges gaps and imperfections in exhaust clamping
  areas
• Seals out poisonous fumes
• High temperature resistance – Up to 300 °C
• Contains no asbestos
• Cleans up in water
• Ready to use – No mixing required, easy to use
• Uses: Recommended for mufflers, tailpipes, joints, catalytic
  converters.
  -At the Manifold: Some modern cars do not have manifold gaskets.
  CRC Maniseal takes the place of a gasket.
  -At the Exhaust Flange: CRC Maniseal spread between the faces and
  in the ‘V’ of the clamp makes a highly satisfactory seal.
  -At the Muffler: When the muffler is renewed and clamped in, the
  annoyance of a leak and subsequent waste of time will be -avoided
  if CRC Maniseal is smeared over the pipes before fitting.
  -Industrial Use: Kiln Repairs – thoroughly wet damaged area, force
  CRC Maniseal into cracks, gaps etc and smooth over with
  fingers.

CRC Maniseal Exhaust Cement Specifications:

• Chemical type: Sodium silicate
• Appearance: Cream paste
• Odour: Odourless
• Specific Gravity: 1.8
• Viscosity: Heavy Paste
• Flash Point: None
• Typical Curing Performance: Cures by the evaporation of water
  and further cures with heat. Full cure will be affected after 24
  hours of drying and driving at the maximum operation
  temperature.
• Temperature Resistance: 300 degrees C continuous
• Chemical/Solvent Resistance: The fully cured product retains
  effective properties when in contact with water.