CRC Power Lube With PTFE High Performance Lubricant Spray 300g

Ideal for hard to maintain equipment

The CRC Power Lube with PTFE High Performance Lubricant
Spray is a high performance multi-use lubricant providing
long lasting protection against friction, wear and corrosion. Its
sophisticated additive package with PTFE outperforms most general
purpose lubricants under extreme pressure, dramatically increasing
the life span and operating efficiency of parts and equipment.

CRC Powerlube with PTFE penetrates deeply into cracks, crevices and
joints, displaces moisture and leaves a durable protective film
that minimises surface contact, extends lubricating intervals and
provides excellent corrosion protection. With twice the load
carrying capacity of most general purpose lubricants, CRC Power
Lube is the perfect choice for hard to maintain equipment
especially in extreme operating conditions.

CRC Power Lube with PTFE High Performance Lubricant Spray
Features:

• Additive package with PTFE – Minimises surface contact and
  friction to reduce wear, extend equipment life and maintain peak
  operating conditions
• Withstands extreme pressure – Doubles the load carrying
  capacity and provides long lasting lubrication
• Long lasting lubrication
• Low viscosity film – Penetrates deeply into cracks, crevices
  and joints to lubricate and protect all exposed metal
• High surface tension – Spreads over surface to maximize
  coverage with a thin, even film. Displaces moisture and other
  surface contaminants.
• Safe on all metals and alloys – Testing is advised if in doubt
  on painted surfaces, plastics and rubbers
• Temperature Range -20 °C to +150 °C
• Uses: Recommended for use on bearings, gears, linkages, motors,
  chains, cables, rollers, guide bars, pulleys, cams, valves, tie
  rods, ball joints, hinges, slides, cutting tools, taps, dies,
  pistons, handling equipment, conveyors, hoists, lifts, doorsand
  fans

CRC Power Lube with PTFE High Performance Lubricant Spray
Specifications:

Physical Properties

• Appearance: Amber liquid
• Odour: Wintergreen
• Specific Gravity: 0.81 @ 20 °C
• Propellant: Hydrocaregbon
• Flash Point: < 0 °C
• Temperature Range: -20 °C to +150 °C

Performance Characteristics

• Type of film Oily lubricating film
• Dry time: 5 minutes
• Falex Test ASTM D3233 Exceeds 31500lbs (maximum test limit of
  ASTM D3233 is 3150lbs)