CRC Prime It Red Oxide Primer Aerosol 400ml

Anti-corrosive shop primer for steel

CRC Prime It Red Oxide Primer is a single pack penetrating shop primer with high levels of anti-corrosive zinc complexes. It’s formulated for the protection of structural steel and iron and can be applied over clean or lightly rusted surfaces. It forms a durable protective coating with a red-oxide finish that does not require immediate overcoating, but can be overcoated at a later stage if desired.

Ongoing protection can be achieved through overcoating or simple recoating with CRC Prime It Red Oxide Primer after 3 years, depending on conditions. Protection in extreme conditions may require re-application more frequently.

CRC Prime It Red Oxide Primer Features:

• Zinc enriched for corrosion protection: high levels of anti-corrosive zinc complexes
• Long-term protection: up to 3 years outdoors before overcoating or recoating with CRC Prime It’s necessary, depending on conditions
• Scratch resistant, durable – Withstands harsh outdoor conditions
• Compatible with most standard decorative paint systems for metals
• Ready to Use Aerosol – No additional mixing or chemical additives required. Easy application. No clean up
• Red-oxide finish
• Lead and cadmium free
• MPI Approved C23

CRC Prime It Red Oxide Primer Features:

• CRC Prime It is ideal for use on bare steel and iron surfaces
• Structural steel or frames – Welded seams, spot welding repairs, rivet holes, signs and signposts, pipes, roofs
• Industrial – Equipment and machinery, machine housings
• Farm equipment – Tank stands, fences, gates, animal raceways in milking sheds and yards, farm implements and tractor draw bars, metal junction
• At home – On iron railings, roofing and spouting, gutters, radio and TV aerials, outdoor fixtures, hinges, fences and gates

CRC Prime It Red Oxide Primer Specifications:

Physical Properties

• Propellant (Aerosol): Hydrocarbon
• Temperature Range: Up to 120 degreesC
• Colour: Red-oxide

Performance Characteristics

• Touch Dry: 30 minutes
• Full Cure: Overnight
• Time to Overcoat (without sanding): 1-8 hours
• Time to Overcoat (sanding required): Overnight
• Theoretical Coverage: Up to 2m2/aerosol can
• Reapplication period indoors: Not required
• Reapplication period outdoors: Up to 3 years, depending on conditions
• Clean up with: Mineral turpentine, spraying thinner