CRC Screw It Polyester Filler 400ml

For holes that need filling before screwing

CRC Screw It is a two part polyester filler designed to
fill oversize holes before screwing. CRC Screw It has been
specifically formulated to fill holes, cure rapidly and to accept
screws without cracking or breaking away.

Holes up to 2cm in diameter can be filled in a single
application. CRC Screw It will not sag or run during the
curing process. It will cure to the point where it can be drilled
and screwed in 20 minutes and does not become brittle when
cured.

CRC Screw It works on wood, brick, masonry, plaster
board, metals, plastics and can be used on solid timber or thin
boards with cavities behind them.

Features and Benefits

• Ready to screw in 20 minutes
• Fills holes less than 2cm in a single application
• Can fill holes larger than 2cm in diameter
• Will not sag or run during the curing process
• Does not become brittle when cured
• Remains workable for approximately 5 minutes

Uses

• For holes that need filling before screwing.
• Works on wood, brick, masonry, plaster, board, metals and
  plastic.

Specifications:

Physical Properties

Material Type	Filled polyester composite
Hardness	Hard, cohesive
Cured Colour	Light brown
Hardener Type	50% BPO Paste
Addition Rate	2% (1:50)

Performance Characteristics

Gel Time	5 – 8 minutes
Full Cure	20-30 minutes