CRC Coloured Zinc Anti-Corrosive Coating

Superior rust inhibition

The CRC Coloured Zinc Anti-Corrosive Coating‘s
unique formulation combines superior rust inhibiting properties of
zinc with a tough but flexible enamel coating and a coloured satin
finish in recognised safety colours. High levels of anti-corrosive
zinc complexes are embedded in a resin system which forms a
quick-drying highly-protective enamel coating with excellent
adhesion to bare metal.

CRC Coloured Zinc provides a satin top-coat finish but unlike
standard paint systems, resists undercutting and blistering from
corrosion by forming an effective corrosion barrier. For ultimate
protection, prime the metal surface with Zinc It prior to applying
CRC Coloured Zinc. To achieve a high film build, use CRC Prep It as
an intermediate coat if required. Ongoing protection can be
achieved through simple re-coating after 3 years, depending on
conditions. Protection in extreme conditions may require
re-application more frequently.

Uses:

• Protection + finish in one application – Where a coloured
  finish is required
• Safety – Marking of safety equipment locations, physical
  hazards and protective equipment in recognised safety
  colours
• Structural steel or frames – Welded seams, spot welding
  repairs, rivet holes, signs and signposts, pipes, roofs
• Electrical – Transformers, transmission towers, earth
  pegs
• Farm equipment – Water tanks, tank stands, fences, gates,
  animal raceways in milking sheds and yards, farm implements and
  tractor draw bars, metal junction, terminal boxes, pump equipment,
  corrugated metal buildings
• Boats and boat trailers – Shackles, winches, draw bars,
  subframes, wheel and guards
• Car or caravan – Inner door panels, tow bars, exhaust tail
  pipes and wheel protection under hub caps
• Perfect touch-up – For galvanised products which have been cut,
  drilled or welded
• At home – On iron railings, roofing and spouting, gutters,
  plumbing, ducting, radio and TV aerials, outdoor fixtures, hinges,
  fences and gates, wrought iron, air conditioning and refrigeration
  units
• Industrial – Equipment and machinery, machine housings
• Roading and Construction – Bridges, guard rails, lamp
  stands
• Wherever iron or steel needs protection and a coloured satin
  finish is required

CRC Coloured Zinc Heavy-Duty Anti-Corrosive Coating
Features:

• Zinc enriched for corrosion protection – High levels of
  anti-corrosive zinc complexes in the dried film, embedded in a
  protective enamel coating
• Satin finish – Available in seven colours
• Safety – Colours conform to British Safety Colour
  standards
• Excellent adhesive qualities – Forms a tough coat for long-term
  protection
• Heat Resistance – Up to 120 °C
• Corrosion protection – Corrosion Protection Factor 36 (up to 3
  years before recoating is necessary, depending on
  conditions)
• Fast drying – Touch dry in 20 minutes, recoat within 30
  minutes, full cure in 24 hours
• Easy re-application over existing film and/or clean surfaces –
  For ongoing protection
• Single coat – No overcoating required. For additional
  protection, prime metal surface with CRC Zinc It or CRC Prep It
  prior to applying CRC Coloured Zinc
• Ready to Use Aerosol – No additional mixing or chemical
  additives required. Easy application. No clean up
• Does not contain CFCs, methylene chloride
• MPI Approved C23

CRC Coloured Zinc Heavy-Duty Anti-Corrosive Coating
Specifications:

Approvals

• MPI Approved C23 (all animal product except
  dairy):Black,White,Red,Blue green, yellow, orange
• Conforms to British Safety Colour standards:
  Black Zinc 00 E 53
  Green Zinc 14 E 53
  Blue Zinc 18 E 53
  Yellow Zinc 08 E 51
  Red Zinc 04 E 53

Physical Properties

• Propellant – Aerosol: Hydrocarbon
• Temperature Range: Up to 120ºC
• Corrosion Protection Factor: 36
• Reapplication Period Indoors: As required
• Reapplication Period Outdoors: Up to 3 years, depending on
  conditions
• Colour: Black, white, green, blue, yellow, red, orange

Performance Characteristics

• Touch Dry: 15-20 minutes
• Full Cure: 24 hours
• Time To Overcoat: Within 1 hour or after 24 hours
• Theoretical Coverage: Up to 2m2/aerosol can
• Clean Up With: Mineral turpentine or white spirits