CRC EQ Silicone Multi-Purpose Lubricant Spray 300g

Lubricates and protects

The CRC EQ Silicone Lubricant Spray is a high
quality, multi-purpose clear silicone spray that leaves a thin,
durable, clear, odourless film with high viscosity and
non-corrosive properties. It lubricates and protects over a wide
range of temperatures without leaving marks or stains. It provides
effective waterproofing and superior lubrication especially for
sliding surfaces. It eliminates squeaking and binding caused by
friction.

CRC EQ Silicone is designed specifically for the servicing of
electrical, mechanical and electronic driven equipment and is safe
for use on metals, plastics, rubber, fabrics, wood, glass and
painted surfaces. Some common uses include coin slides, cable
splicing knives and nylon mechanisms in electronic equipment.

Uses:

• Ideal for coin mechanisms, conveyors, cable splicing, knives,
  locks, motor bearings, rubber seals, pinball machines, vending
  machines, pulleys, parking meters, projectors. Ideal on small wire
  pulls.
• For use on electrical and communication systems, photographic
  equipment, controls
• Lubricates, silicone spray waterproofs and protects rubber,
  plastic, metal, nylon and wood
• Restores, protects and preserves rubber mats, mountings and
  seals, vinyl tops, weather stripping, dashboards, door mouldings
  and plastic parts
• Protects and lubricates tools, hoists, jacks, latches,
  switches, controls, zippers and pulleys

CRC EQ Silicone Lubricant Spray Features:

• Multi-Purpose Product – Lubricates, protects,
  waterproofs
• Clear silicone, odourless, non-staining
• Harmless to most materials – Metals, plastics, rubber,
  adhesives, wood, fabrics, glass, inks and paints
• Wide Temperature Range – Effective from -40 degreesC to 260
  degreesC
• Resists Moisture – Stays in place in damp environments
• Reduces Friction and Wear – Reduces noise. Extends product
  life. Reduces downtime
• Excellent mould release, parting agent and machine bed
  lubricant
• Eliminates the need for messy greases and oils

CRC EQ Silicone Lubricant Spray
Specifications:

Approvals

• NSF H1 Registered for use in meat and poultry plants
• Meets FDA regulation 21 CFR 178.3570 for lubricants with
  incidental food contact

Physical Properties

• Appearance: Clear, water-white liquid
• Odour: Pleasant solvent
• Propellant: Hydrocarbon
• Flash Point: <0 degreesC
• Boiling Point: 80 degreesC initial
• Solubility: Negligible in water
• Specific Gravity: 0.87

Performance Characteristics

• Type of film: Viscous glossy film
• Dry Time: 5 minutes
• Temperature Range: -40 degreesC to +260 degreesC
• Dielectric Strength: 350 Volts/Mil
• Dielectric Constant @ 25 degrees C: 2.750 106 cycle
• Volume Resistivity: 1 x 1014 Ohm/cm
• Thermal Conductivity @ 66 degrees C: 018kg-cal/H/m2 degrees
  C